01621 841 100 msb@msbpcl.co.uk

Cerakote H Series Oven-Cure Coatings

Cerakote H Series is an oven-cure ceramic coating offering exceptional hardness, adhesion and resistance to corrosion, chemicals and wear, in a wide range of colours. We apply H Series in-house at our workshop in Heybridge, Essex.

What is Cerakote H Series?

H Series is Cerakote’s most widely used range. It’s built on a unique ceramic-polymer technology that gives both flexibility and excellent wear resistance. Key features:

  • Thin film: around 1 mil thick and suitable for close-tolerance parts. Internal moving parts may need extra attention to fit.
  • Corrosion and chemical resistance: it resists most solvents and chemicals.
  • Hardness and adhesion: it produces a tough, durable finish.
  • Colour choice: a wide range of colours, including metallics such as gold.

Typical uses

H Series is used on automotive and motorcycle parts, fuel tanks, rocker covers, brake callipers, marine and saltwater applications, and much more.

Colour range

Chemical resistance

Cerakote tested H Series by submerging coated panels in a range of solvents for 24 hours, then rating the average colour change. The results are shown in the table below.

Cerakote H Series chemical resistance test results table

Process, guarantee and contact

Every part is blast cleaned with clean, virgin media, alcohol washed, preheated, masked where required, coated and oven cured.

Cerakote ceramic coatings carry a one-year guarantee, or a two-year guarantee with our two-stage system of a plasma coat base and Cerakote top coat. Full details are on our ceramic coating guarantee page.

For high-temperature parts such as exhausts, see our C Series range. For a quote, call 01621 841100 or email msb@msbpcl.co.uk. You can also send your parts by courier.

Cerakote H Series FAQs

What is the difference between Cerakote H Series and C Series?
H Series is oven-cured and designed for hardness, corrosion and chemical resistance. C Series is air-cured and designed for high-temperature parts such as exhausts.

Is Cerakote H Series resistant to chemicals?
Yes. H Series resists most solvents and chemicals, as shown in Cerakote’s 24-hour immersion testing.

What can Cerakote H Series be applied to?
Automotive and motorcycle parts, fuel tanks, callipers, rocker covers and saltwater applications, among many others.